Evaporative Coils

Product Overview

RAE Evaporator Coils are designed and built meet your most challenging needs. From comfort cooling to product storage RAE Coils has the expertise and capabilities to exceed your requirements. With RAE Corporation manufacturing a complete line of condensing units and unit coolers, we truly do understand the many factors surrounding a proper application.

From critical fin spacing to utilizing today’s new refrigerants, RAE Coils will exceed your expectations!

Product Details


    • 5/8 O.D. X .020 copper tube wall thickness
    • 1/2 O.D. X .017 copper tube wall thickness
    • Tempered aluminum, die-formed plate fins available in a corrugated surface or a flat surface with a waffle edge and extruded fin collars
    • 16-gauge, G-90 galvanized sheet steel casing
    • Depths of up to 12 rows with a single fin pack
    • Depths of up to 24 rows with a split fin design
    • Heights up to 52-1/2” in a single fin
    • Fin spacing ranges from 4 FPI to 20 FPI
    • Tubes are mechanically expanded into the fins
    • Tube sheets are die-formed and full collared and are full coil depth
    • Connections can be exactly matched to existing coil or piping arrangement
    • Leak-tested in a warm water tank

    • 5/8” O.D. X .025”, .030”, .035”, and .049” copper tube wall thicknesses
    • 1/2” O.D. X .025” and .032” copper tube wall thicknesses
    • 3/8” O.D. X .014”, .016”, and .020” copper tube wall thicknesses
    • Copper, acrylic coated plate fins, and aluminum (up to .010 fin thickness) fin materials
    • Baked phenolic coating or cross-linked acrylic coating for corrosive applications
    • Split vertical fin coils with factory fabricated casings for special applications
    • Mechanically expanded fin lengths up to 244”
    • Copper, aluminum or stainless steel casings
    • Carbon steel casings and high integrity/low leakage casings for high pressure boxes
    • Casing flanges
    • Insulated casings with drain pans
    • Galvanized steel, stainless steel, aluminum, and copper tube sheet materials
    • Ultra Case tube sheet – an extruded copper tube sheet supported by a stainless steel casing. As a result, the copper tubes are expanded into a copper tube sheet, eliminating dissimilar metals and providing a mating surface that is significantly less abrasive
    • Industrial-duty coils utilizing steel, aluminum, or stainless steel tubes
    • Industrial-duty coils utilizing copper, acrylic coated, aluminum, steel, or stainless steel fins
    • Mounted expansion valves
    • Installed side port hot gas connections
    • Integrally mounted electric heaters for defrost applications

    • Custom design
    • Custom engineering
    • Unique configurations
    • Special component packages
    • Cased coils
    • Variable configuration design (“flip-flop”) for right or left hand installation
    • Bare tube designs available for use in Hydracooler applications
You must be logged in to post a comment.